FLX069631
Product Usage and Processing Recommendations: Processing temperature maximum: 160°F (70°C) 1. We do not recommend that this product be processed in dryers or UV curing units under excessive heat. Temperatures above 160°F may cause the diffraction pattern to become distorted. 2. Caution: Higher boiling solvents found in some printing inks can cause vinyls to distort. Please note: DESIGN510 pattern repeats every six inches (150mm), and the RAINBOW, MOSAIC, and KSCOPE patterns repeat every nine inches (230mm) in both the machine and transverse directions. The repeat is defined by a seam line. Sheet size determines where seams will be located on converted materials.
Contact: +1 508 885 8200
Value | Thickness (Mils[microns]) |
---|---|
Film | 2.6 (66) +/- 10% |
Adhesive | 0.9-1.0 (23-25) +/- 0.1 (3) |
Liner | 6.6 (168) +/- 10% |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
Value | Dimensional Stability (%) |
---|---|
MD | 0.50 |
TD | 0.50 |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Ultimate Peel from | Average Oz/In | (N/m) |
---|---|---|
Acrylic | 91 | (1001 |
Glass | 92 | (1012) |
Polypropylene | 64 | (704) |
Stainless Steel | 82 | (902) |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
Property | Value | Test Method |
---|---|---|
Expected Shear | Room Temp (hours): 30 | ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load |
Tack (gm/sq cm) | 870 | ASTM D 2979 |
Expected Exterior Life | Two years (vertical exposure, mid continental North America) | |
Service Temperature Range | -40°F to 176°F (-40°C to 80°C) | |
Minimum Application Temperature | 50°F (10°C) | |
Storage Stability | Two years when stored at 70°F (21°C) and 50% relative humidity |
Title | Description |
---|---|
Adhesive | Permanent |
Product Agency | N/A |
Color Family | None |
Converting | Roll to Sheet,Sheet Form |
Double Face | 0 |
Film Family | None |
Master Web Width | 54.000 |
Other Available Widths | N/A |
Print Technology | Solvent Screen,UV Inkjet - Wide,UV Screen |
Quilon | 0 |
Remoist | 0 |
Surface Type | Glass,HSE Plastic,LSE Plastic,Metal,Paint |
Surface Treatment | Polish,Wax |
Surface Texture | Smooth |
Surface Profile | Flat,Rigid |
Pricing Overview
MSI Pricing
Roll Pricing
SQF Pricing
Stock Code | Type | Sheets In Box | Trimmed | Width | Length | Core Size | MA | NE | CA | Canada |
---|---|---|---|---|---|---|---|---|---|---|
BP902603 | R | N/A | N | 54 | 0 | 6 | X | - | - | - |
Please log in to view sales figures.
All of the descriptive information, the typical performance data, and recommendations for the use of Flexcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by Flexcon. All purchasers of Flexcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of Flexcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.
Modified on: