FLX069053
Flexcon® PharmCal® TamperMark™ 069053 (PharmCal® MM 150 Silver Checkerboard TC-716 V-156 Spec 50K/Q-8)
1.5 Mil Silver Polyester, Checkerboard Pattern, Permanent Adhesive, Paper Liner
Request informationBenefits
- Quilon®* coated to prevent label pick-off
- Ideal for FDA 21CFR 211.132 and EU Falsified Medicines Directive (FMD) regulations for tamper-proof labeling and packaging
- 6-month change notification
Contact: +1 508 885 8200
Features
- 1.5 mil tamper-evident silver polyester film leaves behind checkerboard pattern
- Topcoat optimizes printability with resin and wax/resin thermal transfer, UV & solvent screen, flexographic, narrow-format UV inkjet, and hot stamping
- High-adhesive bond onto plastic containers, cardboard, and packaging materials
- Backed with a 50 lb. semi-bleached kraft release liner that is Quilon®* coated
Additional Details
“Fit-for-use” testing is recommended under actual application conditions.
*Quilon® is a registered trademark of Zaclon LLC
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 6.1 | |
| Film | 1.4 +/- 10% | 36 |
| Adhesive | 1.0-1.1 +/- 0.1 | 25-28 +/- 3 |
| Liner | 3.1 +/- 10% | 79 |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Dimensional Stability (%) | Value |
|---|---|
| MD | No shrinkage observed |
| TD |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Acrylic | Product shows tampering when r | |
| Glass | Product shows tampering when r | |
| Stainless Steel | Product shows tampering when r |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | 5 | ASTM D 3654 Method A (1 hr dwell, 1 sq. in, 4 lb. load) |
| Tack (g) | 820 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Additional Information | ||
| Service Temperature | -40°F to 302°F (-40°C to 150°C) Tamper-evident maximum 104°F (40°C) | |
| Minimum Application Temperature | 32°F (0°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
Product Details
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | N/A |
| Color Family | Silver |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 54 |
| Other Available Widths | N/A |
| Print Technology | Offset - UV, Letterpress - UV, Screen - UV, Flexographic - Water, Hot Stamping, Screen - Solvent, Flexographic - UV, Inkjet - UV Narrow Format, Flexographic - Solvent |
| Surface Type | LSE Plastic, Metal, Paper/Fiber, Polypropylene, TPO Plastic, Glass, HDPE, HSE Plastic, Aluminum |
| Surface Treatment | Varnish, Wax, Ink |
| Surface Texture | Rough, Smooth, Frosted |
| Surface Profile | Recess, Rigid, Single Curve, Flat |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
