Features & Benefits

  • Gloss topcoated 2.0 mil silver polyester provides consistent surface smoothness, excellent dimensional stability, and endurance to varying temperatures
  • Silver polyester provides a high-end appearance
  • Printable via resin and wax/resin thermal transfer; UV & solvent screen; UV, solvent & water flexo; laser (toner); and narrow-format UV inkjet
  • Permanent acrylic pressure-sensitive adhesive with a heavier coat weight offers high initial tack, high shear, and high ultimate bond to a wide variety of oily and rough textured surfaces, including low-surface energy plastics and painted metal
  • 90 lb. moisture stable polycoated release liner is ideal for roll-to-sheet and sheet-form converting on most narrow-format presses
  • UL recognized under UL 969 – UL File No. PGJI2.MH16635 Printing Materials – Component
  • cUL recognized under UL File No. PGJI8.MH16635 – Printing Materials Certified for Canada – Component – under CAN/CSA standard C22.2, No. 0.15

All narrow-format UV inkjet systems are different; therefore, we recommend "fit-for-use" testing.For laser diecutability, please check with your equipment manufacturer.

Product Applications

  • Supreme - Consumer Durables - Durable Goods - Compliance Label

Contact: +1 508 885 8200

Technical Data

Physical Properties

ValueThickness (Mils[microns])
Film2.0 (51) +/- 10%
Adhesive 1.9-2.1 (48-53) +/- 0.1 (3)
Liner6.9 (175) +/- 10%

Test Method: ASTM D 3652 (Modified for use with non-tape products)

ValueDimensional Stability (%)
No Shrinkage Observed

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
ABS Textured Side24(264)
Acrylic Powder Paint89(979)
Epoxy Powder Paint111(1221)
Painted Metal100(1100)
Polyester Powder Paint47(517)
Polyurethane Powder Paint110(1210)
Stainless Steel87(957)

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Expected Shear

PropertyValueTest Method
Expected Shear Room Temp (hours): 75ASTM D 3654 Method A
a. 1 hr. dwell
b. 1 sq. in. surface
c. 4 lb. load
Tack (gm/sq cm)1650ASTM D 2979
Expected Exterior LifeTwo years
Service Temperature Range-40°F to 302°F (-40°C to 150°C)
Minimum Application Temperature50°F (10°C)
Storage StabilityTwo years when stored at 70°F (21°C) and 50% relative humidity

Product Details

Title Description
Adhesive Permanent
Product Agency CUL Recognized,UL Recognized
Color Family Silver
Converting Roll to Sheet,Sheet Form
Double Face 0
Film Family Polyester
Master Web Width 60.000
Other Available Widths N/A
Print Technology Conventional Offset,Solvent Flexo,Solvent Screen,Thermal Transfer,UV Flexo,UV Inkjet - Narrow,UV Offset,UV Screen
Quilon 0
Remoist 0
Surface Type N/A
Surface Treatment N/A
Surface Texture Rough
Surface Profile N/A

Pricing Overview

MSI Pricing

Roll Pricing

SQF Pricing

Quick Ship

Stock Code Type Sheets In Box Trimmed Width Length Core Size MA NE CA Canada
SP606HS R N/A N 60 1 6 - X - -

Historical Sales

Please log in to view sales figures.

Product Performance and Suitability

All of the descriptive information, the typical performance data, and recommendations for the use of Flexcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by Flexcon. All purchasers of Flexcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of Flexcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.

Modified on: