FLX068713

Flexcon® NexGen™ MSP344S Matte Topcoated 2 Mil Silver PET High Permanent Adhesive Sheet Liner UL Recognized

2 MIL Matte Topcoated Silver Polyester - Sheet Form

Home Technical Data and Details Availability

Benefits

  • CUL Recognized, L- Adhesives, UL Recognized
  • High shear and high peel adhesive resists cold flow and oozing
  • Adhesive bonds well to base film substrates

Click to view PDF

Contact: +1 508 885 8200

Features

MM 200 SILVER MTC-722 L-344 92 FC PFW 

  • Matte topcoated 2.0 mil silver polyester provides consistent surface smoothness, excellent dimensional stability, and endurance to varying temperatures
  • Topcoat provides excellent resistance to chemicals, moisture, smudging and scratching
  • Printable via resin and wax/resin thermal transfer; UV & solvent screen; UV, solvent & water flexo; laser (toner); and narrow-format UV inkjet
  • Matte filled topcoat allows for successful printing with a wider range of wax/resin ribbons
  • Unique matte topcoat allows for greater than four times as many die revolutions before retooling compared with competing label materials
  • Permanent acrylic pressure-sensitive adhesive bonds well to low- and high-surface energy plastics, painted metal, powder-coated paint, polycarbonate and fiberglass
  • 90 lb. moisture stable polycoated release liner is ideal for roll-to-sheet and sheet-form converting on most narrow-format presses

Additional Details

All narrow-format UV inkjet systems are different; therefore, we recommend "fit-for-use" testing.For laser diecutability, please check with your equipment manufacturer.

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.1 +/- 10%53
Adhesive 0.9-1.0 +/- 0.1 (3)23-25
Liner6.9 +/- 10%175

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD No Shrinkage Observed
TD

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Acrylic77847
Stainless Steel55605
Glass68748
Polypropylene15165
Aluminum54594

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Additional PropertiesValueTest Method
Expected Shear
Tack360ASTM D 2979
Expected Exterior LifeTwo years
Additional Information
Service Temperature -40°F to 302°F (-40°C to 150°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% RH

Product Details

TitleDescription
AdhesivePermanent
Product AgencyUL_UL Recognized, CUL_CUL Recognized
Color FamilySilver
ConvertingRoll to Sheet
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyFlexographic - UV, Inkjet - UV Narrow Format, Screen - Solvent, Screen - UV, Flexographic - Solvent, Offset - UV
Surface TypeN/A
Surface TreatmentN/A
Surface TextureN/A
Surface ProfileN/A

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.