FLX068693

Flexcon® NexGen™ CP344

2.0 Mil Gloss Topcoated Clear Polyester, Permanent Adhesive, Roll Form

Benefits

  • UL recognized under UL 969 – UL File No. PGJI2.MH16635 PrintingMaterials – Component
  • cUL recognized under UL File No. PGJI8.MH16635 – Printing Materials Certified for Canada – Component – under CAN/CSA standard C22.2, No. 0.15

Contact: +1 508 885 8200

Features

  • 2.0 mil clear gloss topcoated polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures
  • Printable via resin and wax/resin thermal transfer; UV & solvent screen; UV, solvent & water flexo; and UV inkjet
  • Topcoat is more universally printable than other thermal transfer printable products
  • Permanent acrylic pressure-sensitive adhesive bonds well to low- and high-surface energy plastics, painted metal, powder-coated paint, polycarbonate and fiberglass
  • High shear and high peel adhesive resists cold flow and oozing
  • Adhesive bonds well to base film substrates
  • Backed with a 50 lb. bleached kraft release liner ideal for roll-form converting
  • Liner is suitable for optical sensing on most thermal transfer printers

Additional Details

All narrow-format UV inkjet systems are different; therefore, we recommend "fit-for-use" testing.

For laser diecutability, please check with your equipment manufacturer

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.0 +/- 10%51
Adhesive 0.9-1.0 +/- 0.1 (3)23-25
Liner3.1 +/- 10%79

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD No Shrinkage Observed
TD

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Acrylic68748
Stainless Steel55605
Glass56616
Polypropylene12132
Aluminum54594

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Additional PropertiesValueTest Method
Expected Shear
Tack360ASTM D 2979
Expected Exterior LifeTwo years
Additional Information
Service Temperature -40°F to 302°F (-40°C to 150°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% RH

Product Details

TitleDescription
AdhesivePermanent
Product AgencyCUL_CUL Recognized, UL_UL Recognized
Color FamilyClear
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyFlexographic - Solvent, Flexographic - UV, Inkjet - UV Narrow Format, Screen - Solvent, Screen - UV, Offset - UV
Surface TypeN/A
Surface TreatmentN/A
Surface TextureSmooth
Surface ProfileN/A

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.