FLX068348

FlexMark® L-59FR 068348 (FLEXcon® FLEXmark® FOIL 200 SILVER V-59FR SPEC 50K-9)

Home Technical Data and Details Pricing Quick-Ship

Features & Benefits

  • 2.0 mil aluminum foil for supreme heat resistance
  • 2.0 mil white flame-retardant non-halogenated adhesive
  • Adhesive adheres well to acrylic, polypropylene, stainless steel, polyethylene, and glass
  • 50 lb. bleached kraft release liner offers good diecutability
  • Liner ideal for roll converting and manual dispensing
  • FlexMark® L-59FR products at a 2.0 mil to 4.0 mil adhesive thickness are rated UL 94 V-0 when coated on 2.0 mil polyimide and 2.0 mil aluminum foil (UL E518655)
  • FlexMark® L-59FR products at a 2.0 mil adhesive thickness on a 2.0 mil polyimide and 2.0 mil aluminum foil pass the following test standards: FMVSS 302; Vertical 60 sec burn: FAR 25.853 (a) Appendix F, Part I, (a), 1, (i); Vertical 12 sec burn: FAR 25.853 (a) Appendix F, Part I, (a), 1, (ii); Heat Release: FAR 25.853 (d) Appendix F, Part IV; Smoke Density: FAR 25.853 (d) Appendix F, Part V; Toxicity Test: BSS 7239

Product Applications

  • Supreme - Transportation - Aerospace - Fire Retardant Adhesive
  • Supreme - Transportation - Automotive - Fire Retardant Adhesive
Click to print

Contact: +1 508 885 8200

Technical Data

Physical Properties

ValueThickness (Mils[microns])
Film2.0 (51) +/- 10%
Adhesive 1.9-2.1 (48-53) +/- 0.1 (3)
Liner3.1 (79) +/- 10%

Test Method: ASTM D 3652 (Modified for use with non-tape products)

ValueDimensional Stability (%)
No Shrinkage Observed

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Acrylic63(693)
Glass53(583)
Polyethylene20(220)
Polypropylene9(99)
Stainless Steel41(451)

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Expected Shear

PropertyValueTest Method
Expected Shear Room Temp (hours): 100ASTM D 3654 Method A
a. 1 hr. dwell
b. 1 sq. in. surface
c. 4 lb. load
Tack (gm/sq cm)980ASTM D 2979
FlammabilitySee other side for information
Expected Exterior LifeTwo years
Service Temperature Range-40°F to 302°F (-40°C to 150°C)
Minimum Application Temperature50°F (10°C)
Storage StabilityTwo years when stored at 70°F (21°C) and 50% relative humidity

Product Details

Title Description
Adhesive Permanent
Product Agency UL Recognized,FAR 25.853(a)(a)(i): 60 sec burn,FAR 25.853(a)(a)(ii): 12 sec burn,FAR 25.853(d)(iv): Heat Release,FAR 25.853(v): Smoke Density,FMVSS 302,BSS 7239: Drager Tube Toxicity
Color Family Silver
Converting Roll Form,Roll to Sheet
Double Face 0
Film Family Foil
Master Web Width 48.000
Other Available Widths N/A
Print Technology N/A
Quilon N
Remoist N
Surface Type ABS,ABS Textured,Aluminum,HDPE,PET,Polycarbonate,Polypropylene,Stainless Steel
Surface Treatment N/A
Surface Texture Frosted,Rough,Smooth
Surface Profile Concave,Convex,Flat,Recess,Rigid,Single Curve

Pricing Overview

MSI Pricing

Roll Pricing

SQF Pricing

Historical Sales

Please log in to view sales figures.

Product Performance and Suitability

All of the descriptive information, the typical performance data, and recommendations for the use of Flexcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by Flexcon. All purchasers of Flexcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of Flexcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.

Modified on: