FLX068345
For guidance only - data are based on three or less production runs.
For the Complete Product Data View Featuring ASTM D 3330 Adhesion Results
Contact: +1 508 885 8200
Value | Thickness (Mils[microns]) |
---|---|
Adhesive | 1.9-2.1 (48-53) +/- 0.1 (3) |
Liner | 6.4 (163) +/- 10% |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
Property | Value | Test Method |
---|---|---|
Expected Shear | Room Temp (hours): 100 | ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load |
Tack (gm/sq cm) | 980 | ASTM D 2979 |
Flammability | See other side for information | |
Expected Exterior Life | Depends on substrate, adhesive is suitable for outdoor use | |
Service Temperature Range | -40°F to 302°F (-40°C to 150°C) | |
Minimum Application Temperature | 50°F (10°C) | |
Storage Stability | Two years when stored at 70°F (21°C) and 50% relative humidity |
Title | Description |
---|---|
Adhesive | Permanent |
Product Agency | UL Recognized,BSS 7239: Drager Tube Toxicity,FAR 25.853(a)(a)(i): 60 sec burn,FAR 25.853(a)(a)(ii): 12 sec burn,FAR 25.853(d)(iv): Heat Release,FAR 25.853(v): Smoke Density |
Color Family | White |
Converting | Roll Form,Roll to Sheet |
Double Face | 0 |
Film Family | Laminating Adhesive |
Master Web Width | 54.000 |
Other Available Widths | N/A |
Print Technology | N/A |
Quilon | 0 |
Remoist | 0 |
Surface Type | ABS,Polypropylene,PET,Polycarbonate,Stainless Steel,Aluminum,HDPE,Aluminum,ABS Textured |
Surface Treatment | N/A |
Surface Texture | Rough,Smooth,Frosted |
Surface Profile | Concave,Flat,Recess,Rigid,Single Curve,Convex |
Pricing Overview
MSI Pricing
Roll Pricing
SQF Pricing
Please log in to view sales figures.
All of the descriptive information, the typical performance data, and recommendations for the use of Flexcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by Flexcon. All purchasers of Flexcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of Flexcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.
Modified on: