Our brand-new story
Flexcon is writing a new chapter.
This product is part of FLEXcon's Bus and Train Wrap Advertising System. It's used with FLEXcon® BUSart™ V 400 F White A-69 90 PFW BA (Base Film. For installation instructions, visit: FLEXcon's Transit Technical Guide and Installation Instructions.
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe website.
Questions? Ask our experts: 508-885-8214
Return To Top
Test Method: ASTM D 3652 (Modified for use with non-tape products)
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Ultimate Peel from
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
All of the descriptive information, the typical performance data, and recommendations for the use of FLEXcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by FLEXcon. All purchasers of FLEXcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of FLEXcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.