FLX065697

DermaFlex™ P.E.F. 32 WHITE H-529 90 PFW (1.9-2.1)

Features & Benefits

  • 1/32” white polyethylene foam substrate is soft, lightweight, and provides a sturdy base for electrodes & other monitoring applications
  • H-529 general purpose acrylic adhesive with moderate strength
  • Backed with a 90-lb. moisture stable polycoated layflat release liner suitable for roll form, roll to sheet, and sheet form converting

Please note: Our combination of flexible substrates and skin-friendly adhesives form a product portfolio that is suitable for a variety of applications. Choose from existing products, or work with our Technical Service team to create your own unique combination that’s optimized for your specific application needs.

*Biocompatibility testing was completed using a similar ‘source’ adhesive in some circumstances. Full biocompatibility results are available on the web and upon request.
For guidance only, not to be used for setting specifications. The data presented are based on three or less production runs. Product construction sheets are updated as necessary, without notice. Please contact Flexcon to request a copy of most recent version.
DISCLAIMER: Flexcon MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE. This product is a device component intended solely for further processing, manufacturing, or incorporation into a finished device, and is further intended only for use as a device component on intact skin (i.e., not intended for use in the presence of open sores or wounds nor for applications inside the body). Customer is solely responsible for determining whether this component product is fit for Customer’s intended use, including, without limitation, incorporation into Customer’s finished device(s), and for performing any additional testing that may be necessary to support Customer’s intended use. Customer is solely responsible for ensuring that its use of the component product is in compliance with the applicable laws and for obtaining any necessary clearances or approvals from its use of the component product and any finished device that incorporates the component product.

Product Applications

  • Better - Healthcare - Skin Contact -

Contact: +1 508 885 8200

Technical Data

Physical Properties

ValueThickness (Mils[microns])
Film31.25 (794) +/- 15%
Adhesive 1.9-2.1 (48-53) +/- 0.1 (3)
Liner6.9 (175) +/- 10 %

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Acrylic66(726)
Glass62(682)
Polypropylene4(44)
Stainless Steel56(616)

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Expected Shear

PropertyValueTest Method
Expected Shear Room Temp (hours): 100+ASTM D 3654 Method A
a. 1 hr. dwell
b. 1 sq. in. surface
c. 4 lb. load
Tack (gm/sq cm)900ASTM D 2979
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

Title Description
Adhesive Skin Contact
Product Agency ISO 10993
Color Family None
Converting Roll Form,Roll to Sheet,Sheet Form
Double Face 0
Film Family None
Master Web Width 58.000
Other Available Widths 58.00
Print Technology Solvent Flexo,Solvent Screen,UV Flexo,UV Screen,UV Offset,Water Flexo
Quilon 0
Remoist 0
Surface Type N/A
Surface Treatment N/A
Surface Texture N/A
Surface Profile N/A

Pricing Overview

MSI Pricing

Roll Pricing

SQF Pricing

Historical Sales

Please log in to view sales figures.

Product Performance and Suitability

All of the descriptive information, the typical performance data, and recommendations for the use of Flexcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by Flexcon. All purchasers of Flexcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of Flexcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.

Modified on: