FLX000061

Flexcon® MarkWrite™ OP 100 CLEAR V-29 100 POLY H-9

Dry Erase Board: Clear Overlaminate

Home Technical Data and Details Availability

Benefits

  • Ultra-smooth polyester release liner provides ultimate smoothness and flow-out of adhesive on the overlaminating film

Click to view PDF

Contact: +1 508 885 8200

Features

  • Adhesive bonds well to printed base film surfaces
  • Adhesive offers excellent clarity and is designed to provide exceptional bond and excellent shear critical for durability under heavy foot traffic
  • Permanent overlaminating pressure-sensitive acrylic adhesive bonds well to base film surface

Additional Details

We recommend that all markers be tested for clean removability (Example: Expo Low Odor Dry Erase Markers). Daily cleaning of your dry erase film using non-toxic Dry Erase Spray Cleaners or towelettes/cleaning wipes is critical to its performance. If not cleaned daily, the dry erase film can exhibit ghosting (shadow of images dry erased). Over time and after many cleanings, the surface of the dry erase film becomes abraded and needs to be replaced.

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 1.0 +/- 10%25
Adhesive 1.2-1.3 +/- 0.1 (3)30-33
Liner1.0 +/- 5%25

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD No shrinkage observed
TD

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Acrylic49539
Glass29319
Polypropylene11121
Stainless Steel28308

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Additional PropertiesValueTest Method
Expected Shear
Tack490ASTM D 2979
Expected Exterior LifeIndoor use only
Additional Information
Service Temperature -40ºF to 176ºF (-40ºC to 80ºC)
Minimum Application Temperature 50°F (10°C)
Storage StabilityOne year stored at 70°F (21°C) and 50% RH

Product Details

TitleDescription
AdhesiveOverlaminating
Product AgencyN/A
Color FamilyClear
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyN/A
Surface TypeFoamboard, HSE Plastic, Lumber/Wood, LSE Plastic
Surface TreatmentN/A
Surface TextureSmooth
Surface ProfileConvex, Rigid, Flat

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.