FLX059988
Topcoated 3.5 Mil White vinyl, Permanent Adhesive, Roll-to Sheet Liner
Contact: +1 508 885 8200
For Inkjet Printing:• Typical max. ink limit = 250%; • When storing printed graphics, sheeted, stacked or in roll-form, consider leaving an unprinted margin (about 1/4") to allow for potential shrinkage of the film before trimming
Formica® is a registered trademark of the Diller Corp.
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Film | 3.5 +/- 10% | 89 |
| Adhesive | 0.9-1.0 +/- 0.1 (3) | 23-25 |
| Liner | 6.9 +/- 10% | 175 |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Dimensional Stability (%) | Value |
|---|---|
| MD | 0.75 |
| TD | 0.75 |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | 70 | 770 |
| ABS | 62 | 682 |
| Glass | 64 | 704 |
| Aluminum | 66 | 726 |
| Polypropylene | 24 | 264 |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear | ||
| Tack | 750 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Additional Information | ||
| Service Temperature | -40ºF to 176ºF (-40ºC to 80ºC) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% RH |
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | N/A |
| Color Family | White |
| Converting | Roll to Sheet |
| Film Family | N/A |
| Master Web Width | 60 |
| Other Available Widths | N/A |
| Print Technology | Flexographic - Water, Inkjet - Solvent, Flexographic - Solvent, Screen - UV, Screen - Solvent, Inkjet - UV Wide Format, Offset - UV |
| Surface Type | Painted Wallboard, Polypropylene, Sintra, Styrene, Varnished Wood, Metal, Paint, Glass, Flexible Magnet, Melamine (Formica), Ceramic Tile (some), HDPE, Lumber/Wood, Ceramic |
| Surface Treatment | Varnish, Corona Treat, Non-vinyl Based Paint |
| Surface Texture | Smooth |
| Surface Profile | Flat, Rigid |
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.