FLX059981
For Inkjet Printing: • Typical max. ink limit = 250%; • When storing printed graphics, sheeted, stacked or in roll-form, consider leaving an unprinted margin (about 1/4") to allow for potential shrinkage of the film before trimming
Contact: +1 508 885 8200
| Value | Thickness (Mils[microns]) |
|---|---|
| Film | 4.0 (102) +/- 10% |
| Adhesive | 0.9-1.0 +/- 0.1 (3) |
| Liner | 6.9 (175) +/- 10% |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Value | Dimensional Stability (%) |
|---|---|
| MD | 0.75 |
| TD | 0.50 |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| ABS | 110 | (1210) |
| Acrylic Powder Paint | 101 | (1111) |
| Aluminum | 73 | (803) |
| Formica | 48 | (528) |
| Glass | 96 | (1056) |
| HDPE | 41 | (451) |
| Painted Metal | 90 | (990) |
| Painted Wood | 35 | (385) |
| Polycarbonate | 91 | (1001) |
| Polypropylene | 43 | (473) |
| Sintra | 65 | (715) |
| Smooth Painted (non-vinyl) Wallboard | 25 | (275) |
| Stainless Steel | 87 | (957) |
| Styrene | 73 | (803) |
| Varnished Wood | 45 | (495) |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Property | Value | Test Method |
|---|---|---|
| Expected Shear | Room Temp (hours): 15 | ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load |
| Tack (gm/sq cm) | 1000 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Service Temperature Range | -40°F to 176°F (-40°C to 80°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% RH |
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | N/A |
| Color Family | Clear |
| Converting | Roll to Sheet,Sheet Form |
| Double Face | 0 |
| Film Family | Vinyl |
| Master Web Width | 54.000 |
| Other Available Widths | N/A |
| Print Technology | Conventional Offset,Solvent Flexo,Water Flexo,Solvent Inkjet,Solvent Screen,UV Inkjet - Wide,UV Offset,UV Screen |
| Quilon | N |
| Remoist | 0 |
| Surface Type | Flexible Magnet,Glass,HDPE,Linoleum,Lumber/Wood,Melamine (Formica),Metal,Paint,Painted Wallboard,Polypropylene,Powder Coated Paint,PVC,Sealed Concrete,Some Ceramic Tile,Styrene,Varnished Wood |
| Surface Treatment | Corona Treat,Non-vinyl Based Paint,Varnish |
| Surface Texture | N/A |
| Surface Profile | N/A |
Pricing Overview
MSI Pricing
Roll Pricing
SQF Pricing
Please log in to view sales figures.
All of the descriptive information, the typical performance data, and recommendations for the use of Flexcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by Flexcon. All purchasers of Flexcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of Flexcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.
Modified on: