Our brand-new story
Flexcon is writing a new chapter.
FLEXmark® CP with FLEXmark® CR, FLEXmark® CRT, FLEXmark® WR, FLEXmark® WRT, or FLEXmark® WRAE has been investigated by Underwriters Laboratories, Inc., and when used as a system, is in accordance with UL 410, the Standard for Floor Surfaces, for Floor-Graphic Materials (FGM). Please refer to FLEXcon’s Warranty & Limited Remedy Policy for Graphic Advertising for Floors and Indoor Carpets, and Application and Removal Instructions. Nothing contained herein shall expand the Floors and Indoor Carpets Limited Warranty or otherwise be construed as a warranty or guarantee. For Inkjet Printing:• Typical max. ink limit = 250% • When storing printed graphics, sheeted, stacked or in roll-form, consider leaving an unprinted margin (about 1/4") to allow for potential shrinkage of the film before trimming
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe website.
Questions? Ask our experts: 508-885-8214
Return To Top
Test Method: ASTM D 3652 (Modified for use with non-tape products)
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Ultimate Peel from
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
All of the descriptive information, the typical performance data, and recommendations for the use of FLEXcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by FLEXcon. All purchasers of FLEXcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of FLEXcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.
