FLX058679

Flexcon® DPM® UVCM

Durable Goods and Equipment Labeling - 2 Mil Clear Matte UV Resistant Polyester - Overlaminate 

Benefits

  • Overlaminating polyester resists temperature extremes, abrasion and chemical exposure for maximum label protection

Contact: +1 508 885 8200

Features

  • CSA Acceptance, L- Adhesives, UL Recognized
  • 2.0 mil clear matte overlaminating polyester that protects against damaging UV rays, moisture & scratching
  • Permanent pressure-sensitive acrylic adhesive bonds well to base film substrates
  • Backed with a 42 lb. one side polycoated white kraft release liner that results in good adhesive clarity

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.0 +/- 10%51
Adhesive 0.9-1.0 +/- 0.1 (3)23-25
Liner1.0 +/- 10%25

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD No Shrinkage Observed
TD

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Acrylic74781
Stainless Steel65715
Glass72792
Polypropylene444
Polyester53583

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Additional PropertiesValueTest Method
Expected Shear
Tack620ASTM D 2979
Expected Exterior LifeFive years (Based on 2000 hour weathering in Xenon)
Additional Information
Service Temperature -40°F to 302°F (-40°C to 150°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% RH

Product Details

TitleDescription
AdhesiveOverlaminating
Product AgencyCSA_CSA Acceptance, UL_UL Recognized
Color FamilyClear Matte
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyN/A
Surface TypePaint, Paper/Fiber, Powder Coated Paint, Fiberglass, Glass, HSE Plastic, LSE Plastic, Metal, Unsealed Concrete, Asphalt
Surface TreatmentVarnish, Ink
Surface TextureN/A
Surface ProfileRigid, Concave, Compound Curve, Convex, Flat, Flexible, Recess

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.