FLX058033

Flexcon® OptiFlex® EZ™

WPP24014 PP 245 F WHITE PTP V-01 44PP-8 

Benefits

  • Adhesive complies with FDA 175.105 for indirect food contact

Contact: +1 508 885 8200

Features

  • 2.45 mil flexible white polypropylene offers good diecutting properties and excellent resistance to a variety of environments
  • Print-receptive film provides uniform and consistent printability* via rotary letterpress, rotary screen and flexography
  • High-performance, permanent acrylic adhesive adheres to a wide range of container types including low-surface energy HDPE
  • Backed with a 44 lb. polycoated natural Kraft release liner ideal for roll-form converting

Additional Details

*In-line corona treatment recommended to enhance print receptivity

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.35 +/- 10 %60
Adhesive 0.5-0.6 +/- 0.1 (3)13-15
Liner3.0 +/- 10%76

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD No shrinkage observed
TD

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel50550
Acrylic44484
Glass47517
Polypropylene13143
Acrylic44484

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Additional PropertiesValueTest Method
Expected Shear
Tack620ASTM D 2979
Expected Exterior LifeIndoor use only
Additional Information
Service Temperature -40ºF to 176ºF (-40ºC to 80ºC)
Minimum Application Temperature 32°F (0°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% RH

Product Details

TitleDescription
AdhesivePermanent
Product AgencyN/A
Color FamilyWhite
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyLetterpress - UV, Screen - UV, Flexographic - Water, Flexographic - UV
Surface TypeStyrene, HSE Plastic, LSE Plastic, Paint, PET, Polypropylene, PVC, HDPE
Surface TreatmentFlame Treat, Mold Release Agent, Corona Treat
Surface TextureSmooth, Rough
Surface ProfileConcave, Convex, Flat, Flexible, Recess, Rigid, Compound Curve

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.