FLX057817
Create a two-sided interior mounted window graphic by printing Flexcon® FlexMark® 6180 base film on both sides in right-read position. Then laminate the clear permanent side of Flexcon® FlexMount® Select™ DF492211to the printed graphic. The blue side of FlexMount® Select™ DF492211 is removable and is adhered to the inside of the window.
Contact: +1 508 885 8200
Value | Thickness (Mils[microns]) |
---|---|
Removable Adhesive | 0.8-0.9 (20-23) +/- 0.1 (3) |
Liner | 1.4 (36) +/- 10 % |
Film | 1.0 (25) +/- 10 % |
Adhesive | 1.0-1.1 (25-30) +/- 0.1 (3) |
Liner | 1.0 (25) +/- 10 % |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
Ultimate Peel from | Average Oz/In | (N/m) |
---|---|---|
Acrylic (Perm) | 48 | (528) |
Acrylic (Remove) | 29 | (319) |
Glass (Perm) | 41 | (451) |
Glass (Remove) | 18 | (198) |
Polypropylene (Perm) | 10 | (110) |
Polypropylene (Remove) | 12 | (132) |
Stainless Steel (Perm) | 35 | (385) |
Stainless Steel (Remove) | 21 | (231) |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
Property | Value | Test Method |
---|---|---|
Expected Shear | Room Temp (hours) (Permanent Adhesive): 100+ | ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load |
Expected Shear | Room Temp (hours) (Removable Adhesive): Erratic | ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load |
Tack (gm/sq cm) | 300 | ASTM D 2979 |
Tack (gm/sq cm) (Permanent Adhesive) | 450 | |
Expected Exterior Life | Depends on substrate, both adhesives are suitable for outdoor use. | |
Service Temperature Range | -20°F to 302°F (-29°C to 150°C) | |
Minimum Application Temperature | 50°F (10°C) | |
Storage Stability | Two years stored at 70°F (21°C) and 50% RH |
Title | Description |
---|---|
Adhesive | 1 Side Permanent/1 Side Removable |
Product Agency | N/A |
Color Family | Clear |
Converting | Roll Form |
Double Face | Y |
Film Family | Double - Coated |
Master Web Width | 60.000 |
Other Available Widths | N/A |
Print Technology | N/A |
Quilon | N |
Remoist | 0 |
Surface Type | HSE Plastic,Glass |
Surface Treatment | Ink |
Surface Texture | Smooth |
Surface Profile | Flat,Flexible,Rigid |
Pricing Overview
MSI Pricing
Roll Pricing
SQF Pricing
Stock Code | Type | Sheets In Box | Trimmed | Width | Length | Core Size | MA | NE | CA | Canada |
---|---|---|---|---|---|---|---|---|---|---|
DF492211 | R | N/A | N | 60 | 0 | 6 | X | - | - | - |
DF492211BB | R | N/A | Y | 60 | 300 | 3 | X | - | - | X |
Please log in to view sales figures.
All of the descriptive information, the typical performance data, and recommendations for the use of Flexcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by Flexcon. All purchasers of Flexcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of Flexcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.
Modified on: