FLX057612

Flexcon® OptiFlex® Conceal™ WPPM23313

 Topcoated 2.3 Mil White Opaque, V-01 Adhesive, 1.2 Mil Poly Liner

Home Technical Data and Details Availability

Benefits

  • Adhesive complies with FDA 175.105 for indirect food contact

Click to view PDF

Contact: +1 508 885 8200

Features

  • 2.3 mil hard white opaque polypropylene (BOPP) metallized on one side for covering up pre-existing graphics
  • Topcoat optimizes printability with flexographic, rotary screen, rotary letterpress inks and hot stamping
  • Excellent surface smoothness allows for optimum ink laydown
  • High-performance, permanent acrylic adhesive adheres to a wide range of container types including low-surface energy HDPE
  • Polyester release liner contains up to 60% Post Industrial Recycled content, provides good diecutting base and allows for high-speed dispensing

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.3 +/- 10 %58
Adhesive 0.5-0.6 +/- 0.113-15 +/- 3
Liner1.2 +/- 5%30

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD No Shrinkage Observed
TD

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel54594
Acrylic52572
Glass40440
Polypropylene20220
Styrene42462

Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)

Additional PropertiesValueTest Method
Expected Shear5ASTM D 3654 Method A (1 hr dwell, 1 sq. in, 4 lb. load)
Tack730ASTM D 2979
Expected Exterior LifeIndoor use only
Additional Information
Service Temperature -40°F to 212°F (-40°C to 100°C)
Minimum Application Temperature 35°F (1.7°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyN/A
Color FamilyWhite
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyFlexographic - UV, Letterpress - UV, Screen - UV, Flexographic - Water, Hot Stamping, Inkjet - UV Wide Format
Surface TypePaint, HDPE, HSE Plastic, LSE Plastic, Metal, Glass
Surface TreatmentFlame Treat, Mold Release Agent, Corona Treat, Ink
Surface TextureRough, Smooth, Frosted
Surface ProfileFlexible, Recess, Rigid, Single Curve, Flat

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.