FLX057585

Flexcon® OptiFlex® Thin MPE22719 MPE 220 F Silver (MSO) TC-793 V-01 TracRite™ 92

Primary and Secondary Labeling Silver Polyethylene

Home Technical Data and Details Availability

Benefits

  • Offers a 26% reduction over the traditional 3 mil polyethylene
  • Conformable for maximum graphic coverage

Click to view PDF

Contact: +1 508 885 8200

Features

  • "Greener" down-gauged 2.2 mil flexible silver (MSO) polyethylene offers excellent resistance to shrinkage, moisture, humidity, and product contents
  • Thinner gauge PE is a lower cost alternative to the traditional 3 mil polyethylene
  • Printable via UV, solvent & water flexo, UV letterpress, UV offset, UV screen and hot stamping
  • V-01 high-performance, permanent acrylic adhesive adheres to a wide range of container types including low-surface energy HDPE
  • Adhesive complies with FDA 175.105 for indirect food contact
  • Backed with Flexcon® TracRite™ 92 polyester release liner for excellent on-press performance for tight-registration graphics
  • Release liner provides a good diecutting base and allows for high-speed dispensing

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.2 +/- 10%56
Adhesive 0.5-0.6 +/- 0.113-15 +/- 3
Liner0.92 +/- 5%23

Test Method: ASTM D 3652 (Modified for use with non-tape product)

Dimensional Stability (%)Value
MD No shrinkage observed
TD

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Acrylic48528
Glass48528
Polypropylene29309
Stainless Steel51561
Styrene41451

Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)

Additional PropertiesValueTest Method
Expected Shear10 (Permanent adhesive)ASTM D 3654 Method A (1 hr dwell, 1 sq. in, 4 lb. load)
Tack570ASTM D 2979
Expected Exterior LifeIndoor use only
Additional Information
Service Temperature -40°F to 176°F (-40°C to 80°C)
Minimum Application Temperature 35°F (1.7°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyN/A
Color FamilySilver
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyLetterpress - UV, Screen - UV, Flexographic - Water, Flexographic - UV
Surface TypePaint, HSE Plastic, LSE Plastic, Metal, HDPE
Surface TreatmentFlame Treat, Ink, Mold Release Agent, Corona Treat
Surface TextureSmooth
Surface ProfileConvex, Flat, Flexible, Compound Curve

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.