FLX056886

Flexcon® DrumCal™ 51932

2.3 Mil Topcoated White Polypropylene, Permanent Adhesive, Roll-Form Liner - BS 5609 Compliant 

Benefits

  • BS 5609 Section 2 compliant (salt water immersion)
  • BS 5609 Section 3 compliant with a variety of thermal transfer ribbons

Contact: +1 508 885 8200

Features

  • 2.3 mil BBP free white polypropylene film
  • Topcoated surface optimizes printability with thermal transfer resin, UV inkjet, flexographic, rotary screen, rotary letterpress and hot stamping
  • General purpose permanent adhesive bonds well to painted steel, fiber and plastic drums
  • Backed with a 50 lb. bleached kraft release liner made from up to 30% post-consumer waste, ideal for roll form converting
  • Liner is remoisturized for better stability and layflat

Additional Details

Pertaining to BBP Free: None of the RoHS, RoHS 2015, REACH, CPSIA and California Prop 65 substances are knowingly used or intentionally added during the manufacturing process.

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.3 +/- 10%58
Adhesive 0.8-0.9 +/- 0.1 (3)20-23
Liner3.1 +/- 10%79

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD No Shrinkage Observed
TD

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Acrylic49539
Stainless Steel39429
ABS64704
Polypropylene18198
Aluminum63693

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Additional PropertiesValueTest Method
Expected Shear
Tack650ASTM D 2979
Expected Exterior LifeOne year
Additional Information
Service Temperature -40°F to 176°F (-40°C to 80°C)
Minimum Application Temperature 32°F (0°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% RH

Product Details

TitleDescription
AdhesivePermanent
Product AgencyBritish Standard - Drum Label
Color FamilyWhite
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyInkjet - UV Narrow Format, Screen - UV, Screen - Solvent, Flexographic - UV, Inkjet - UV Wide Format, Flexographic - Solvent
Surface TypeGlass, HDPE, Melamine (Formica), Metal, Paint, PET, Polypropylene, Styrene, Closed-Cell Foam, Fiberglass, Foamboard, Ceramic
Surface TreatmentDust, Wax, Dirt
Surface TextureSmooth, Rough
Surface ProfileConcave, Convex, Flat, Rigid

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.