FLX056621

Flexcon® SureFlex™ C120

2.0 Mil Flexible Polypropylene, Permanent Adhesive, Poly Liner

Home Technical Data and Details Availability

Benefits

  • Adhesive complies with FDA 175.105 for indirect food contact

Click to view PDF

Contact: +1 508 885 8200

Features

  • 2 mil flexible clear topcoated BOPP film is suitable for irregular shaped surfaces or large panel surfaces, including full squeeze and crimp
  • Topcoat is compatible with a wide range of inks including UV Flexo, UV Screen, UV Letterpress, Water Flexo, Solvent Flexo and Screen
  • High-performance, permanent acrylic adhesive adheres to a wide range of container types including low-surface energy HDPE
  • Flexcon® TracRite™ 120 polyester release liner provides excellent on-press performance for tight-registration graphics, a good diecutting base and allows for high-speed dispensing

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.0 +/- 10%51
Adhesive 0.5-0.6 +/- 0.1 (3)13-15
Liner1.2 +/- 10%30

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Test Method:

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Acrylic42462
Glass38418
Stainless Steel41451
Polypropylene20220
Aluminum50550

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Additional PropertiesValueTest Method
Expected Shear
Tack660ASTM D 2979
Expected Exterior LifeIndoor use only
Additional Information
Service Temperature -40°F to 212°F (-40°C to 100°C)
Minimum Application Temperature 35°F (1.7°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% RH

Product Details

TitleDescription
AdhesivePermanent
Product AgencyN/A
Color FamilyClear
ConvertingRoll Form
Film FamilyN/A
Master Web Width76
Other Available WidthsN/A
Print TechnologyHot Stamping, Flexographic - Solvent, Flexographic - UV, Letterpress - UV, Offset - UV, Screen - UV, Flexographic - Water
Surface TypeGlass, PVC, HDPE, HSE Plastic, LSE Plastic, Metal, Paint, PET, Polypropylene
Surface TreatmentCorona Treat, Flame Treat, Mold Release Agent
Surface TextureFrosted, Rough, Smooth
Surface ProfileCompound Curve, Concave, Convex, Flat, Flexible, Recess, Rigid, Single Curve

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.