FLX000563

Flexcon® FlexMount® TT 200 L-606 SPEC 80B PFM 90 PFW

2 Mil Permanant Adhesive Transfer Tape with an 80lb two-sided release liner and 90 lb layflat liner

Benefits

  • Adhesive exhibits exceptional performance on textured and uneven surfaces

Contact: +1 508 885 8200

Features

  • 2.0 mil transfer adhesive
  • Permanent acrylic adhesive offers medium tack, high shear and excellent adhesion to a variety of metal and plastic surfaces, including polypropylene, polyethylene, PORON® and Kushon® cellular rubber products
  • Adhesive offers high initial tack, high shear, and high ultimate bond to a wide variety of rough textured surfaces, including low-surface energy plastics and painted metal
  • 80 lb. backside branded bleached polycoated mando release liner. 
  • 90 lb. moisture stable polycoated layflat release liner ideal for sheet and roll-to-sheet converting
  • UL recognized under UL 969 - UL File No. PGGU2.MH10170 Marking and Labeling System Materials - Component

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film
Adhesive 1.9-2.1 +/- 0.1 (3)48-53
Liner4.8 +/- 10%122

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Test Method:

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)

Test Method:

Additional PropertiesValueTest Method
Expected Shear
Tack1530ASTM D 2979
Expected Exterior LifeDepends on substrate, adhesive is suitable for outdoor use
Additional Information
Service Temperature -40°F to 302°F (-40°C to 150°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (10°C) and 50% RH

Product Details

TitleDescription
AdhesivePermanent
Product AgencyUL_UL Recognized
Color FamilyN/A
ConvertingSheet Form
Film FamilyN/A
Master Web Width48
Other Available WidthsN/A
Print TechnologyN/A
Surface TypePaint, LSE Plastic, Powder Coated Paint, HSE Plastic
Surface TreatmentInk
Surface TextureSmooth
Surface ProfileFlexible, Rigid, Flat

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.