FLX054512

WALLdeco™ 6778 6 MIL WHITE FABRIC, PERMANENT ADHESIVE, SHEET LINER

Home Technical Data and Details Pricing Quick-Ship

Features & Benefits

  • 6.0 mil light weight, polycoated white fabric film with a unique woven texture
  • High-end product for indoor wall graphics as compared to vinyl
  • Tight weave of fabric allows for crisp, sharp color when printed via solvent and UV inkjet, UV and conventional offset, and UV and solvent screen
  • High-performance permanent adhesive designed to adhere well to flat, smooth painted (non-vinyl) wall boards
  • Backed with a stay flat release liner
  • Excellent layflat release liner properties for printing and converting
  • CONEG and CPSIA compliant

Please click here to view Flexcon's WallDeco™ Technical Guide and Application Instructions. For Inkjet Printing: • Typical max. ink limit = 250% • When storing printed graphics, sheeted, stacked or in roll-form, consider leaving an unprinted margin (about 1/4") to allow for potential shrinkage of the film before trimming

Product Applications

  • Better - Promotional Advertising - Wall Graphics -
Click to print

Contact: +1 508 885 8200

Technical Data

Physical Properties

ValueThickness (Mils[microns])
Film6.0 (152) +/- 10%
Adhesive 1.4-1.5 (36-38) +/- 0.1 (3)
Liner6.9 (175) +/- 10%

Test Method: ASTM D 3652 (Modified for use with non-tape products)

ValueDimensional Stability (%)
MD0.75
TD0.50

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Smooth Painted (non vinyl) Wall Board23(253)

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Expected Shear

PropertyValueTest Method
Expected Shear Room Temp (hours): 2ASTM D 3654 Method A
a. 1 hr. dwell
b. 1 sq. in. surface
c. 4 lb. load
Tack (gm/sq cm)900ASTM D 2979
FlammabilityASTM E 84 Class I or A Rated
Expected Exterior LifeIndoor use only
Service Temperature Range-40°F to 176°F (-40°C to 80°C)
Minimum Application Temperature50°F (10°C)
Storage StabilityTwo years when stored at 70°F (21°C) and 50% relative humidity

Product Details

Title Description
Adhesive Permanent
Product Agency N/A
Color Family White
Converting Roll to Sheet,Sheet Form
Double Face 0
Film Family Polyolefin
Master Web Width 54.000
Other Available Widths N/A
Print Technology UV Inkjet - Wide,UV Offset,UV Screen,Solvent Inkjet,Solvent Screen
Quilon N
Remoist 0
Surface Type Painted Wallboard (non-vinyl based paint)
Surface Treatment Ink,Varnish
Surface Texture Smooth
Surface Profile Flat

Pricing Overview

MSI Pricing

Roll Pricing

SQF Pricing

Quick Ship

Stock Code Type Sheets In Box Trimmed Width Length Core Size MA NE CA Canada
WD6778 R N/A N 54 0 6 X - - -

Historical Sales

Please log in to view sales figures.

Product Performance and Suitability

All of the descriptive information, the typical performance data, and recommendations for the use of Flexcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by Flexcon. All purchasers of Flexcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of Flexcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.

Modified on: