FLX052434

PharmCal® SUPREME 052434 (PHARMcal® PP 200 H CLEAR TC-332™ V-344 TRACrite™ 150)

Home Technical Data and Details Pricing Quick-Ship

Features & Benefits

  • 2.0 mil hard clear polypropylene offers excellent resistance to shrinkage, high temperatures, moisture, humidity and product contents
  • Film clarity is ideal for achieving the no-label-look on clear vials and syringes
  • Topcoat optimizes printability via narrow-format UV inkjet, flexographic, UV screen, UV letterpress, UV offset, and hot stamping
  • Permanent aggressive adhesive provides a high ultimate bond and excellent clarity
  • High-adhesive performance bonds to tight-radius glass or plastic containers
  • Backed with Flexcon® TracRite™ 150 polyester release liner for excellent on-press performance for tight registration graphics
  • Release liner is ideal for roll-form applications that require high-speed dispensing
  • 21 CFR 175.105; ISO 10993-5, -10 Compliant*
  • 12-month change notification

*FDA CFR 175.105: Adhesives may be safely used as components of articles intended for use in packaging, transporting, or holding food in accordance with the following prescribed conditions. ISO 10993 Biological evaluation of medical devices: Part 5:Tests for in vitro cytotoxicity; Part 10:Tests for irritation and skin sensitization. “Fit-for-use” testing is recommended under actual application conditions.

Product Applications

  • Supreme - Healthcare - Pharmaceutical - Label
Click to print

Contact: +1 508 885 8200

Technical Data

Physical Properties

ValueThickness (Mils[microns])
Film2.0 (51) +/- 10%
Adhesive 0.7-0.8 (18-20) +/- 0.1 (3)
Liner1.4 (36) +/- 5%

Test Method: ASTM D 3652 (Modified for use with non-tape products)

ValueDimensional Stability (%)
No Shrinkage Observed

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Glass47(517)
Polypropylene14(154)

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Expected Shear

PropertyValueTest Method
Expected Shear Room Temp (hours): 75ASTM D 3654 Method A
a. 1 hr. dwell
b. 1 sq. in. surface
c. 4 lb. load
Tack (gm/sq cm)850ASTM D 2979
Expected Exterior LifeIndoor use only
Service Temperature Range-40°F to 212°F (-40°C to 100°C)
Minimum Application Temperature50°F (10°C)
Storage StabilityTwo years when stored at 70°F (21°C) and 50% relative humidity

Product Details

Title Description
Adhesive Permanent
Product Agency N/A
Color Family Clear
Converting Roll Form
Double Face N
Film Family Polypropylene
Master Web Width 60.000
Other Available Widths 60.00
Print Technology UV Flexo,UV Inkjet - Narrow,UV Letterpress,UV Offset,UV Screen,Hot Stamping,Solvent Flexo,Solvent Screen,Water Flexo,Thermal Transfer
Quilon N
Remoist N
Surface Type Glass,HDPE,Polypropylene
Surface Treatment N/A
Surface Texture Smooth
Surface Profile Single Curve,Rigid,Flat

Pricing Overview

MSI Pricing

Roll Pricing

SQF Pricing

Historical Sales

Please log in to view sales figures.

Product Performance and Suitability

All of the descriptive information, the typical performance data, and recommendations for the use of Flexcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by Flexcon. All purchasers of Flexcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of Flexcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.

Modified on: