FLX000474
*Recommendations: Application surfaces must be above 50°F (10°C). Surfaces must be clean and dry to obtain best adhesion results. Firm and even laminating pressure helps promote better adhesive contact and improves bond strength. Always laminate to exclude air entrapment. When diecutting, the 80 lb. printed mando liner should be used as the diecutting base.
For SwitchMark® inquiries in the United States and Canada, please contact
Insulectro Distribution at (603) 629-4412. For other inquiries, please contact your
Flexcon Sales Representative or call Flexcon at (508) 885-8296.
Contact: +1 508 885 8200
| Value | Thickness (Mils[microns]) |
|---|---|
| 90 PFW | 6.9 (175) +/- 10% |
| Adhesive | 1.9-2.1 (48-53) +/- 0.2 (5) |
| SPEC 80B PFM (black stripes) | 4.8 (122) +/- 10% |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| ABS | 48 | (528) |
| Alkyd Enamel Paint | 49 | (539) |
| Aluminum | 81 | (891) |
| Conductive Solvent Screen Ink - Acheson Colloids 479SS | 56 | (616) |
| Decorative Solvent Screen Ink - Coates Screen C-99 Series | 48 | (528) |
| Decorative UV Screen Ink - Coates Screen PD Series | 69 | (759) |
| Decorative UV Screen Ink - Nazdar 3400 Series | 98 | (1078) |
| Decorative UV Screen Ink - Nor-Cote Int'l MSK Series | 67 | (737) |
| Dielectric UV Screen Ink - Acheson Colloids 452SS | 64 | (704) |
| Polycarbonate | 73 | (803) |
| Polyester | 82 | (902) |
| PVC | 76 | (836) |
| Stainless Steel | 63 | (703) |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Property | Value | Test Method |
|---|---|---|
| Expected Shear | Room Temp (hours): 100+ | ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load |
| Tack (gm/sq cm) | 260 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Service Temperature Range | -40°F to 302°F (-40°C to 150°C) with polyester film | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% RH |
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | UL Recognized,RoHS 2002/95/EC Compliant ,RoHS 2003/11/EC Compliant,RoHS 76/69/EEC Compliant |
| Color Family | Clear |
| Converting | Sheet Form |
| Double Face | N |
| Film Family | Laminating Adhesive |
| Master Web Width | 48.000 |
| Other Available Widths | N/A |
| Print Technology | N/A |
| Quilon | N |
| Remoist | N |
| Surface Type | HSE Plastic,Metal,Paint |
| Surface Treatment | Ink |
| Surface Texture | Smooth |
| Surface Profile | Flat,Rigid,Flexible |
Pricing Overview
MSI Pricing
Roll Pricing
SQF Pricing
Please log in to view sales figures.
All of the descriptive information, the typical performance data, and recommendations for the use of Flexcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by Flexcon. All purchasers of Flexcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of Flexcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.
Modified on: