FLX000324
Contact: +1 508 885 8200
| Value | Thickness (Mils[microns]) |
|---|---|
| Film | 1.0 (25) +/- 10% |
| Adhesive | 0.9-1.0 (23-25) +/- 0.1 (3) |
| Liner | 1.0 (25) +/- 5% |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Value | Dimensional Stability (%) |
|---|---|
| No Shrinkage Observed |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Acrylic | 47 | (517) |
| Glass | 42 | (462) |
| Polypropylene | 14 | (154) |
| Stainless Steel | 42 | (462) |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Property | Value | Test Method |
|---|---|---|
| Expected Shear | Room Temp (hours): 100 | ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load |
| Expected Shear | ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load | |
| Tack (gm/sq cm) | 410 | ASTM D 2979 |
| Expected Exterior Life | Five years (Based on 2000 hour weathering in Xenon) | |
| Service Temperature Range | -40°F to 302°F (-40°C to 150°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years when stored at 70°F (21°C) and 50% relative humidity |
| Title | Description |
|---|---|
| Adhesive | Overlaminating |
| Product Agency | CSA Acceptance,CSA Acceptance,UL Recognized |
| Color Family | Clear |
| Converting | Roll Form |
| Double Face | N |
| Film Family | Overlaminate - Polyester |
| Master Web Width | 60.000 |
| Other Available Widths | N/A |
| Print Technology | N/A |
| Quilon | N |
| Remoist | N |
| Surface Type | LSE Plastic,HSE Plastic,Metal,Fiberglass,Paper/Fiber,Powder Coated Paint,Paint,Glass |
| Surface Treatment | Ink,Varnish |
| Surface Texture | N/A |
| Surface Profile | Single Curve,Flat,Concave,Convex,Recess |
Pricing Overview
MSI Pricing
Roll Pricing
SQF Pricing
| Stock Code | Type | Sheets In Box | Trimmed | Width | Length | Core Size | MA | NE | CA | Canada |
|---|---|---|---|---|---|---|---|---|---|---|
| 324-6 | R | N/A | Y | 6 | 150 | 3 | - | - | - | X |
| DPM-UVCG | R | N/A | N | 60 | 0 | 6 | X | X | X | - |
Please log in to view sales figures.
All of the descriptive information, the typical performance data, and recommendations for the use of Flexcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by Flexcon. All purchasers of Flexcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of Flexcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.
Modified on: