FLX000312
DPM® PCRTS 2 MIL Printable Clear PET High Performance Adhesive for Rough/Textured Surfaces Roll Liner
Durable Goods and Equipment Labeling Clear Polyester for Rough Textured Surfaces - Roll Form
Request informationBenefits
- Ideal for roll to roll converting
- UL recognized under UL 969 - UL File No. PGGU2.MH10170 Marking and Labeling System Materials - Component
- CSA accepted under CSA File No. 99214
Contact: +1 508 885 8200
Features
- 2.0 mil clear polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures
- Print-receptive surface is compatible with most conventional and UV ink systems (we recommend evaluating the intended ink system for compatibility with the product under the application conditions)
- Acrylic adhesive offers high initial tack, high shear, and high ultimate bond to a wide variety of rough textured surfaces, including low-surface energy plastics and painted metal
- 50 lb. bleached kraft release liner offers good diecutability
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 7.52 | |
| Film | 2.0 +/- 10 % | 51 |
| Adhesive | 1.9-2.1 +/- 0.1 | 48-53 +/- 3 |
| Liner | 3.1 +/- 10 % | 79 |
Test Method: ASTM D 3652 (Modified for use with non-tape product)
| Dimensional Stability (%) | Value |
|---|---|
| MD | No shrinkage observed |
| TD |
Test Method: On Al panel at 160°F (71°C) for 24 hr.
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | 104 | 1144 |
| Acrylic | 112 | 1232 |
| Glass | 118 | 1298 |
| Polypropylene | 22 | 242 |
Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear | 100 | ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load) |
| Tack | 1520 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Additional Information | ||
| Service Temperature | -40°F to 302°F (-40°C to 150°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
Product Details
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | CSA_CSA Acceptance, CUL_CUL Recognized, UL_UL Recognized |
| Color Family | Clear |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 60 |
| Other Available Widths | N/A |
| Print Technology | Flexographic - Solvent, Letterpress - UV, Offset - UV, Flexographic - UV, Flexographic - Water |
| Surface Type | LSE Plastic, Ceramic, Rubber, HSE Plastic, Metal, Powder Coated Paint, Paint, Glass, Polycarbonate |
| Surface Treatment | Oil, Condensation, Corona Treat, Dirt, Dust, Flame Treat, Frost, Mold Release Agent, Silicone, Moisture, Slip Agent, Varnish |
| Surface Texture | Frosted, Extra Rough, Rough, Smooth |
| Surface Profile | Single Curve, Concave, Convex, Recess, Flat |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
