FLX000306
Flexcon® DPM® Flex White
Durable Goods and Equipment Labeling Flexible White Vinyl - Roll Form
Request informationBenefits
- In most cases, corona treatment is not required
- Adhesive bonds well to base film substrates
- Cosistent surface smoothness, excellent dimensional stability, and conformability
Contact: +1 508 885 8200
Features
- CSA Acceptance, L- Adhesives, UL PGJI2 Recognized Printed w/Jetrion 4000 Series, UL Recognized
- 3.5 mil double-faced flexible white vinyl
- Print-receptive 4.0 mil white flexible vinyl provides consistent surface smoothness, excellent dimensional stability, and conformability
- Printable via resin and wax/resin thermal transfer, UV and solvent screen, UV, solvent & water flexo, laser (toner); and narrow-format UV inkjet
- Permanent acrylic pressure-sensitive adhesive bonds well to low- and high-surface energy plastics, painted metal, powder-coated paint, polycarbonate and fiberglass
- High shear and high peel adhesive resists cold flow and oozing
- Backed with a 50 lb. bleached Kraft release liner ideal for roll-form converting
- Liner is suitable for optical sensing on most thermal transfer printers
Additional Details
- Order custom widths without purchasing a whole master through Flexcon® FlexChoice™ for Durables
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 7.9 | |
| Film | 3.5 +/- 10% | 89 |
| Adhesive | 0.9-1.0 +/- 0.1 | 23-25 +/- 3 |
| Liner | 3.1 +/- 10% | 79 |
Test Method: ASTM D 3652 (Modified for use with non-tape product)
| Dimensional Stability (%) | Value |
|---|---|
| MD | 0.75 |
| TD | 0.75 |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | 101 | 1111 |
| Acrylic | 69 | 759 |
| Glass | 64 | 704 |
| Polypropylene | 24 | 264 |
Test Method: ASTM D 903 (Modified for 72 hr. dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear | 15 | ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load) |
| Tack | 750 | ASTM D 2979 |
| Expected Exterior Life | Five years based on 2000 hrs Xenon Arc testing | |
| Additional Information | ||
| Service Temperature | -40°F to 176°F (-40°C to 80°C) | |
| Minimum Application Temperature | 50°F (10°C | |
| Storage Stability | Two years when stored at 70°F (21°C) and 50% relative humidity |
Product Details
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | CSA_CSA Acceptance, UL_UL Recognized, UL_UL PGJI2 Recognized Printed w/Jetrion 4000 Series |
| Color Family | White |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 60 |
| Other Available Widths | N/A |
| Print Technology | Letterpress - UV, Offset - UV, Flexographic - UV, Flexographic - Water, Flexographic - Solvent |
| Surface Type | Rubber, Ceramic, Lumber/Wood, Unsealed Concrete, Asphalt, Glass, HSE Plastic, Paint, Metal, Fiberglass, Powder Coated Paint, LSE Plastic, Flexible Magnet, Polycarbonate |
| Surface Treatment | Condensation, Frost, Moisture, Oil, Other, Silicone, Stain Resistant, Flame Treat, Dust, Varnish, Dirt, Ink, Corona Treat, Mold Release Agent, Slip Agent |
| Surface Texture | Frosted, Rough, Smooth |
| Surface Profile | Compound Curve, Flexible, Recess, Rigid, Single Curve, Convex, Concave, Flat |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
