FLX028904

Flexcon® WindowDeco™ 6270

3.6 Mil White Polyolefin, Removable Adhesive, Sheet Liner

Contact: +1 508 885 8200

Features

  • 3.6 mil flexible white polyolefin (non-vinyl "greener") phthalate-free film that produced with less solvent with a smooth surface for graphic reproduction
  • Printable via UV and solvent screen, and UV inkjet reducing VOC emissions
  • Phthalate free and produced with less solvent as compared to solvent adhesive systems
  • Complies with CONEG and CPSIA
  • Low tack, removable pressure-sensitive adhesive bonds well to smooth non-tinted glass interior and exterior surfaces over a wide range of tempatures while removing cleanly
  • Adhesive adheres well to an exterior glass surface over a wide range of temperatures
  • 90 lb. moisture stable polycoated layflat release liner ideal for sheet and roll-to-sheet converting
  • Excellent layflat release liner properties for printing and converting
  • Overlaminating will extend the life of the graphic - contact your Flexcon Technical Service representative for more information

Additional Details

Definitions: CONEG = Northeastern Governors; CPSIA = Consumer Products Safety Improvement Act; and VOCs = Volatile Organic Compounds).

Please refer to Flexcon's Window Graphics Installation Guide for more information.

For Inkjet Printing:

• Typical max. ink limit = 250%

• When storing printed graphics, sheeted, stacked or in roll-form, consider leaving an unprinted margin (about 1/4") to allow for potential shrinkage of the film before trimming

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 3.6 +/- 10%91
Adhesive 0.8-0.9 +/- 0.1 (3)20-23
Liner6.9 +/- 10%175

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD 0.25
TD 0.25

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Non-tinted Glass444

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Additional PropertiesValueTest Method
Expected Shear
Tack200ASTM D 2979
Expected Exterior LifeUp to one year
Additional Information
Service Temperature -20°F to 176°F (-29°C to 80°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% RH

Product Details

TitleDescription
AdhesiveRemovable
Product AgencyN/A
Color FamilyWhite
ConvertingRoll to Sheet
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyScreen - UV, Inkjet - UV Wide Format, Screen - Solvent
Surface TypeMelamine (Formica), Glass
Surface TreatmentN/A
Surface TextureSmooth
Surface ProfileRigid, Flat

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.