FLX028903

WINDOWdeco™ 6272 3.6 MIL CLEAR POLYOLEFIN LOW TACK REMOVABLE ADHESIVE SHEET LINER

Home Technical Data and Details Pricing Quick-Ship

Features & Benefits

  • 3.6 mil flexible clear polyolefin (non-vinyl "greener") film with a smooth surface for graphic reproduction
  • Phthalate free and produced with less solvent as compared to solvent adhesive systems
  • Complies with CONEG and CPSIA
  • Printable via UV and solvent screen, and UV inkjet
  • When printed UV, VOCs emissions are reduced yielding less impact on the environment
  • Low tack, removable pressure-sensitive adhesive bonds well to smooth non-tinted glass surfaces while removing cleanly
  • Adhesive adheres well to an exterior glass surface over a wide range of temperatures
  • Suitable for mounting on the outside and inside of windows
  • Backed with a 94 lb. premium grade moisture stable polycoated layflat release liner
  • Overlaminating will extend the life of the graphic - contact your Flexcon Technical Service representative for more information

Definitions: CONEG = Northeastern Governors; CPSIA = Consumer Products Safety Improvement Act; and VOCs = Volatile Organic Compounds). Please refer to Flexcon's Window Graphics Installation Guide for more information. For Inkjet Printing: • Typical max. ink limit = 250%; • When storing printed graphics, sheeted, stacked or in roll-form, consider leaving an unprinted margin (about 1/4") to allow for potential shrinkage of the film before trimming

Product Applications

  • Better - Promotional Advertising - Window Graphics - Low Tack
Click to print

Contact: +1 508 885 8200

Technical Data

Physical Properties

ValueThickness (Mils[microns])
Film3.6 (91) +/- 10%
Adhesive 0.8-0.9 (20-23) +/- 0.1 (3)
Liner6.9 (175) +/- 10%

Test Method: ASTM D 3652 (Modified for use with non-tape products)

ValueDimensional Stability (%)
MD0.25
TD0.25

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Non-tinted Glass6(66)

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Expected Shear

PropertyValueTest Method
Expected Shear Room Temp (hours): 15ASTM D 3654 Method A
a. 1 hr. dwell
b. 1 sq. in. surface
c. 4 lb. load
Tack (gm/sq cm)370ASTM D 2979
Expected Exterior LifeUp to one year
Service Temperature Range-20°F to 176°F (-29°C to 80°C)
Minimum Application Temperature50°F (10°C)
Storage StabilityTwo years when stored at 70°F (21°C) and 50% relative humidity

Product Details

Title Description
Adhesive Removable
Product Agency N/A
Color Family Clear
Converting Roll to Sheet,Sheet Form
Double Face 0
Film Family Polyolefin
Master Web Width 60.000
Other Available Widths N/A
Print Technology Solvent Screen,UV Inkjet - Wide,UV Screen
Quilon N
Remoist 0
Surface Type Glass,Melamine (Formica)
Surface Treatment N/A
Surface Texture Smooth
Surface Profile Flat,Rigid

Pricing Overview

MSI Pricing

Roll Pricing

SQF Pricing

Quick Ship

Stock Code Type Sheets In Box Trimmed Width Length Core Size MA NE CA Canada
WD6272 R N/A N 60 0 6 X X - -

Historical Sales

Please log in to view sales figures.

Product Performance and Suitability

All of the descriptive information, the typical performance data, and recommendations for the use of Flexcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by Flexcon. All purchasers of Flexcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of Flexcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.

Modified on: