FLX000282
CompuCal® Excel™ 20440 MTC-722 MATTE TOPCOAT 2 MIL CLEAR PET WITH HIGH PERF ADH ROLL FORM LINER
Durable Goods and Equipment Labeling - Matte Topcoated Clear Polyester - Thermal Transfer Printable
Request informationBenefits
- UL recognized under UL 969 - UL File No. PGJI2.MH16635 Printing Materials - Component
- CSA accepted under CSA File No. 99214
Contact: +1 508 885 8200
Features
- 2.0 mil matte topcoated clear polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures
- Matte topcoated 2.0 mil white polyester provides consistent surface smoothness, excellent dimensional stability, and endurance to varying temperatures
- Printable via resin and wax/resin thermal transfer; UV & solvent screen; UV, solvent & water flexo; laser (toner); narrow-format UV inkjet; UV letter press; and UV offset
- Permanent acrylic pressure-sensitive adhesive bonds well to low- and high-surface energy plastics, painted metal, powder-coated paint, polycarbonate and fiberglass
- High shear and high peel adhesive resists cold flow and oozing
- Adhesive bonds well to base film substrates
- Backed with a 50 lb. bleached kraft release liner ideal for roll-form converting
- Liner is suitable for optical sensing on most thermal transfer printers
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 6.5 | |
| Film | 2.1 +/- 10 % | 53 |
| Adhesive | 0.8-0.9 +/- 0.1 | 20-23 +/- 3 |
| Liner | 3.1 +/- 10 % | 79 |
Test Method: ASTM D 3652 (Modified for use with non-tape product)
| Dimensional Stability (%) | Value |
|---|---|
| MD | No shrinkage observed |
| TD |
Test Method: On Al panel at 160°F (71°C) for 24 hr.
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | 55 | 605 |
| Acrylic | 77 | 847 |
| Glass | 68 | 748 |
| Polypropylene | 15 | 165 |
Test Method: ASTM D 903 (Modified for 72 hr. dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | 30 | ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load) |
| Tack (g) | 1030 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Additional Information | ||
| Service Temperature | -40°F to 302°F (-40°C to 150°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
Product Details
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | UL_UL Recognized, CSA_CSA Acceptance |
| Color Family | Clear |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 60 |
| Other Available Widths | N/A |
| Print Technology | Laser - Roll Form, Laser - Flash Fusion, Laser - Ion Deposition, Flexographic - UV, Screen - UV, Screen - Solvent, Letterpress - UV, Flexographic - Water, Flexographic - Solvent |
| Surface Type | Glass, Unsealed Concrete, Fiberglass, Asphalt, Ceramic, Rubber, Paint, Powder Coated Paint, Metal, HSE Plastic, LSE Plastic, Polycarbonate |
| Surface Treatment | Condensation, Dirt, Frost, Ink, Moisture, Oil, Silicone, Varnish, Corona Treat, Pressure Treated, Flame Treat, Dust, Mold Release Agent, Slip Agent |
| Surface Texture | Frosted, Smooth, Rough |
| Surface Profile | Concave, Flexible, Recess, Rigid, Flat, Single Curve |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
