FLX027516

Flexcon® TamperMark™ PE 200 White Destruct TC-634 V-88 Spec 50K-8

2.0 Mil White Destructible Polyethylene, Permanent Adhesive, Paper Liner

Home Technical Data and Details Availability

Benefits

  • Backed with a 50 lb. bleached kraft release liner ideal for roll-form converting
  • Liner is suitable for optical sensing on most thermal transfer printers

Click to view PDF

Contact: +1 508 885 8200

Features

  • 2.0 mil destructible white polyethylene destructs or distorts easily
  • Topcoat optimizes ink receptivity with flexographic, offset and letterpress inks
  • Aggressive permanent rubber based adhesive offers excellent adhesion to a wide variety of surfaces

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.0 +/- 10%51
Adhesive 1.0-1.1 +/- 0.125-28 +/- 3
Liner3.1 +/- 10%79

Test Method: ASTM D 3652 (Modified for use with non-tape product)

Dimensional Stability (%)Value
MD 0.5
TD 0.5

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless SteelFilm ripsFilm rips
AcrylicFilm ripsFilm rips
GlassFilm ripsFilm rips
PolypropyleneFilm ripsFilm rips
ABSFilm ripsFilm rips

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Additional PropertiesValueTest Method
Expected Shear5+ (Film Rips)ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load)
Tack630ASTM D 2979
Expected Exterior LifeIndoor use only
Additional Information
Service Temperature -40°F to 176°F (-40°C to 80°C)
Minimum Application Temperature 35°F (2°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyN/A
Color FamilyWhite
ConvertingRoll Form
Film FamilyN/A
Master Web Width54.5
Other Available WidthsN/A
Print TechnologyScreen - Solvent, Screen - UV, Flexographic - Water, Flexographic - Solvent
Surface TypeGlass, HSE Plastic, LSE Plastic, Metal, Polycarbonate, Powder Coated Paint, Rubber, Ceramic
Surface TreatmentDirt, Dust, Mold Release Agent, Pressure Treated, Slip Agent, Corona Treat
Surface TextureSmooth, Rough
Surface ProfileCompound Curve, Concave, Convex, Flat, Flexible, Recess, Rigid, Single Curve

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.