FLX024229
BusArt™ OV5055 2 Mil Clear Cast Laminating Vinyl
Transit: Bus & Train Wraps - Window Perf Optically Clear Overlaminate
Request informationBenefits
- 7 years expected exterior life
- Approved by OUTFRONT Media and Vector Media for full bus and train wraps, ultra kings, ultra super kings, fullbacks and halfbacks
- Overlaminate is part of the Painted-On-Look Cast System, Flexcon® FlexMark® BilBrd™ CWRTS and BusArt™ OV5055 - for rough textured walls. Graphics applied with heat gun and foam roller
Contact: +1 508 885 8200
Features
- 2.0 mil clear cast vinyl overlaminate with optically clear adhesive
Additional Details
- This product is part of Flexcon's Bus and Train Wrap Advertising System. It can be used with Flexcon® SeeThru-Sign® STSWBF2 (Base Film). For installation instructions, visit: Flexcon's Transit Technical Guide and Installation Instructions.
- BusArt™ OV5055 meets flammability requirements ASTM E 162 – Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source and ASTM E 662 – Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
- This product is part of the Painted-On-Look Cast System,FlexMark® BilBrd™ CWRTS base film and BusArt™ OV5055 overlaminate for wall graphics. For installation instructions, visit: Flexcon's Technical Guide and Application Instructions.
*Optical clarity has many interpretations. Its use in the description of BusArt™ OV5055 is market/application specific to overlaminates used for perforated window films in bus wraps where there are no specifications for haze and/or light transmission required.
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 3.97 | |
| Film | 2.0 +/- 10 % | 51 |
| Adhesive | 1.0-1.1 +/- 0.1 | 25-28 +/- 3 |
| Liner | 1.0 +/- 5% | 25 |
Test Method: ASTM D 3652 (Modified for use with non-tape product)
| Dimensional Stability (%) | Value |
|---|---|
| MD | 0.5 |
| TD | 0.5 |
Test Method: On Al panel at 160°F (71°C) for 24 hr.
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | 43 | 473 |
| Acrylic | 65 | 715 |
| Glass | 53 | 583 |
| Polypropylene | 17 | 187 |
Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | 20+ (Film rips) | ASTM D 3654 Method A (1 hr dwell, 1 sq. in, 4 lb. load) |
| Tack (g) | 270 | ASTM D 2979 |
| Expected Exterior Life | Seven years | |
| Additional Information | ||
| Service Temperature | -40°F to 176°F (-40°C to 80°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
Product Details
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | Vector Media, OUTFRONT Media |
| Color Family | Clear |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 54 |
| Other Available Widths | N/A |
| Print Technology | N/A |
| Surface Type | N/A |
| Surface Treatment | Varnish, Ink |
| Surface Texture | Smooth |
| Surface Profile | Compound Curve, Rigid |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
