FLX021761

Flexcon® ThermlFilm Select® 21980

2.0 Mil Gloss Topcoated White Polyester, Permanent Adhesive, Roll-Form Liner (1.45-1.55)

Home Technical Data and Details Availability

Benefits

  • Adhesive exhibits exceptional performance on textured and uneven surfaces
  • Quilon®* coated to prevent label pick-off
  • UL recognized under UL 969 - UL File No. PGJI2.MH16635 Printing Materials - Component
  • CUL recognized under UL File No. PGJI8.MH16635 - Printing Materials Certified for Canada - Component - under CAN/CSA standard C22.2, No. 0.15
  • CSA accepted under CSA File No. 99214

Click to view PDF

Contact: +1 508 885 8200

Features

  • 2.0 mil gloss topcoated white polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures
  • Topcoat resists smudging and abrasion when printed with resin and wax/resin thermal transfer ribbons
  • Topcoat is compatible with color and black resin and wax/resin thermal transfer ribbons (we recommend evaluating the intended ribbon and ink system for compatibility with the product under the application conditions)
  • Adhesive offers high initial tack, high shear, and high ultimate bond to a wide variety of rough textured surfaces, including low-surface energy plastics and painted metal
  • Backed with a 50 lb. semi-bleached kraft release liner that is Quilon®* coated 

Additional Details

*Quilon® is a registered trademark of Zaclon LLC

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.0 +/- 10 %51
Adhesive 1.4-1.5 +/- 0.136-38 +/- 3
Liner3.1 +/- 10 %79

Test Method: ASTM D 3652 (Modified for use with non-tape product)

Dimensional Stability (%)Value
MD No shrinkage observed
TD No shrinkage observed

Test Method: On Al panel at 160°F (71°C) for 24 hr.

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel90990
Acrylic941034
Glass1041144
Polypropylene29319
ABS87957

Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)

Additional PropertiesValueTest Method
Expected Shear75ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load)
Tack1680ASTM D 2979
Expected Exterior LifeTwo years
Additional Information
Service Temperature -40°F to 302°F (-40°C to 150°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyCSA_CSA Acceptance, CUL_CUL Recognized, UL_UL Recognized
Color FamilyWhite
ConvertingRoll Form
Film FamilyN/A
Master Web Width61
Other Available Widths60
Print TechnologyScreen - Solvent, Flexographic - Solvent
Surface TypeRubber, HSE Plastic, Metal, Fiberglass, Glass, Unsealed Concrete, Ceramic, Paint, Polycarbonate, Powder Coated Paint, Asphalt
Surface TreatmentSlip Agent, Varnish, Flame Treat, Ink, Dust, Dirt, Corona Treat
Surface TextureSmooth, Rough
Surface ProfileRecess, Single Curve, Flat, Convex, Concave

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.