FLX021399

SeeThru-Sign® STSCF2 6 MIL 70/30 CLEAR PERFORATED FILM REM.ADH. PERF'D CLEAR SHEET LINER

Home Technical Data and Details Pricing Quick-Ship

Features & Benefits

  • 6.0 mil perforated clear vinyl provides optical clarity for see thru viewing from the inside looking out for interior-mounted perforated window applications
  • 70/30 vinyl perforation pattern yields more image area for retail graphics
  • Printable via UV and solvent screen, UV inkjet, and latex
  • Removable pressure-sensitive acrylic adhesive bonds well to glass
  • Backed with a perforated 90 lb. liner capped with a clear sheet liner allowing the product to be UV printable

Please note: This product is not intended for sheet-form offset. Recommendations: Please refer to the "Application Configuration Guidelines" and the "Flexcon's Window Graphics Installation Guide” for more information.
Application Awareness: FLEXcon does not recommend using this product if being applied to substrates that are protected with anti-reflection or scratch-resistant coatings, damage may occur when the film is removed. For Inkjet Printing: • Typical max. ink limit = 250% • When storing printed graphics, sheeted, stacked or in roll-form, consider leaving an unprinted margin (about 1/4") to allow for potential shrinkage of the film before trimming

Product Applications

  • Better - Promotional Advertising - Window Graphics - Perforated
Click to print

Contact: +1 508 885 8200

Technical Data

Physical Properties

ValueThickness (Mils[microns])
Film6.0 (152) +/- 15%
Adhesive 0.8-0.9 (20-23) +/- 0.1 (3)
Liner7.4 (188) +/- 10%

Test Method: ASTM D 3652 (Modified for use with non-tape products)

ValueDimensional Stability (%)
MD0.50
TD0.50

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Acrylic16(176)
Glass11(121)
Polypropylene9(99)
Stainless Steel14(154)

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Expected Shear

PropertyValueTest Method
Expected Shear Room Temp (hours): Erratic sheer caused by perforation and low peel removable adhesiveASTM D 3654 Method A
a. 1 hr. dwell
b. 1 sq. in. surface
c. 4 lb. load
Tack (gm/sq cm)130ASTM D 2979
Expected Exterior LifeDesigned for interior window mounting applications
(removable for up to 1 year after installation)
Service Temperature Range-40°F to 176°F (140°C to 80°C)
Minimum Application Temperature40°F (4.5°C)
Storage StabilityOne year when stored at 70°F (21°C) and 50% relative humidity

Product Details

Title Description
Adhesive Removable
Product Agency N/A
Color Family Clear
Converting Roll to Sheet
Double Face 0
Film Family Vinyl
Master Web Width 53.000
Other Available Widths N/A
Print Technology Solvent Screen,UV Inkjet - Wide,UV Screen,HP Latex
Quilon 0
Remoist 0
Surface Type Glass
Surface Treatment N/A
Surface Texture Smooth
Surface Profile Flat,Rigid

Pricing Overview

MSI Pricing

Roll Pricing

SQF Pricing

Quick Ship

Stock Code Type Sheets In Box Trimmed Width Length Core Size MA NE CA Canada
STSCF2 R N/A N 53 0 6 X - - -
STSCF2E R N/A Y 53 150 3 X - X -

Historical Sales

Please log in to view sales figures.

Product Performance and Suitability

All of the descriptive information, the typical performance data, and recommendations for the use of Flexcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by Flexcon. All purchasers of Flexcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of Flexcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.

Modified on: