FLX000211

Flexcon® PharmCal® Supreme 000211 (PharmCal® PP 200 H Clear TC-332™ V-232C TracRite™ 150)

2.0 Mil Clear Polypropylene, Permanent Fluorescing Adhesive, Poly Liner

Home Technical Data and Details Availability

Benefits

  • Adhesive has a photoluminescent additive for label verification
  • 12-month change notification


Click to view PDF

Contact: +1 508 885 8200

Features

  • 2.0 mil clear polypropylene offers excellent resistance to shrinkage, high temperatures, moisture, humidity and product contents
  • Film clarity is ideal for achieving the no-label-look on clear vials and syringes
  • Topcoat optimizes printability via narrow-format UV inkjet, flexographic, UV screen, UV letterpress, UV offset, and hot stamping
  • Permanent pressure-sensitive acrylic adhesive bonds well to glass and polypropylene
  • Adhesive offers excellent tack, clarity and wet out characteristics
  • Flexcon® TracRite™ 150 polyester release liner for excellent on-press performance for tight registration graphics
  • Release liner is ideal for roll-form applications that require high-speed dispensing

Additional Details

"Fit-for-use” testing is recommended under actual application conditions.

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.0 +/- 10 %51
Adhesive 0.6-0.7 +/- 0.115-18 +/- 3
Liner1.4 +/- 5 %36

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD No shrinkage observed
TD

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Glass39429
Polypropylene666

Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)

Additional PropertiesValueTest Method
Expected Shear100ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load)
Tack480ASTM D 2979
Expected Exterior LifeIndoor use only
Additional Information
Service Temperature -40°F to 212°F (-40°C to 100°C)
Minimum Application Temperature 35°F (2°C)
Storage StabilityTwo years when stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyN/A
Color FamilyClear
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyFlexographic - UV, Hot Stamping, Letterpress - UV, Offset - UV, Screen - UV, Flexographic - Water, Flexographic - Solvent, Inkjet - UV Narrow Format
Surface TypeHSE Plastic, LSE Plastic, Glass
Surface TreatmentMold Release Agent, Flame Treat, Corona Treat
Surface TextureSmooth
Surface ProfileRigid, Convex

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.