FLX000132

Flexcon® Classics Plus® 41106

4.0 Mil White Vinyl, Permanent Adhesive, Sheet Liner

Home Technical Data and Details Availability

Benefits

  • Permanent pressure-sensitive acrylic adhesive bonds well to a variety of surfaces including low surface energy plastics, paper, wood, glass and metal
  • Excellent stayflat release liner properties for printing and converting

Click to view PDF

Contact: +1 508 885 8200

Features

  • 3.5 mil semi-flexible white vinyl film resists on-liner and applied shrinkage
  • Excellent printability via conventional offset (litho)
  • Backed with a layflat 90 lb. moisture stable polycoated release liner ideal for sheet-form converting

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 3.5 +/- 10%89
Adhesive 1.0-1.1 +/- 0.1 (3)25-28
Liner6.9 +/- 10%175

Test Method: ASTM D 3652 (Modified for use with non-tape product)

Dimensional Stability (%)Value
MD <1.0
TD <1.0

Test Method: On Al panel at 160°F (71°C) for 24 hr.

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Acrylic73803
Glass70770
Polypropylene32352
Styrene70770

Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)

Additional PropertiesValueTest Method
Expected Shear
Tack370ASTM D 2979
Expected Exterior LifeOne Years
Additional Information Chemical Resistance, Water Good, Gasoline Fair, Basic Cleaners Good, Toluene Poor, ASTM D 896 (Modified for number of cycles and cycle time)
Service Temperature -40°F to 176°F (-40°C to 80°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% RH

Product Details

TitleDescription
AdhesivePermanent
Product AgencyN/A
Color FamilyWhite
ConvertingRoll to Sheet
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyOffset - UV
Surface TypeHSE Plastic, LSE Plastic, Paint, Sintra, Foamboard
Surface TreatmentN/A
Surface TextureSmooth
Surface ProfileFlat

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.