FLX012068
Recommendations: This product is designed for use on smooth, flat surfaces and should not be applied over corrugations or rivets. Prior to application, the surface(s) must be clean and dry. Please be sure that printed graphics, using solvent inkjet, have been allowed to thoroughly dry, either through the use of heat or by exposing unrolled material to the air. If excessive solvents remain, they may penetrate the vinyl causing it to become overly soft and pliable, inhibiting proper installation and removal of the graphic.
*Sound paint surface is defined as possessing a 20 lb. per inch minimum peel bond between the paint and paint-receptive surface.
Contact: +1 508 885 8200
Value | Thickness (Mils[microns]) |
---|---|
Film | 3.4 (86) +/- 10% |
Adhesive | 0.8-0.9 (20-23) +/- 0.1 (3) |
Liner | 6.9 (175) +/- 10% |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
Value | Dimensional Stability (%) |
---|---|
MD | less than 0.75 |
TD | less than 0.75 |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Value | Elongation (%) |
---|---|
MD | 110 +/- 25 |
TD | 200 +/- 50 |
Test Method: ASTM D 882
Value | Tensile Strength (psi) |
---|---|
MD | 3700 +/- 400 |
TD | 3400 +/- 400 |
Test Method: ASTM D 882
Ultimate Peel from | Average Oz/In | (N/m) |
---|---|---|
Painted Metal | 25 | (275) |
Painted Plastic | 27 | (297) |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
Property | Value | Test Method |
---|---|---|
Expected Shear | Room Temp (hours): 5 | ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load |
Tack (gm/sq cm) | 230 | ASTM D 2979 |
Removability | Up to one year | |
Service Temperature Range | -20°F to 176°F (-29°C to 80°C) | |
Minimum Application Temperature | 50°F (10°C) | |
Storage Stability | Shelf life of 2 years unprinted, or 1 year processed and applied within 1 year of processing. Storage Conditions: Store at 70°F (21°C) and 50% relative humidity; out of direct sunlight. |
Title | Description |
---|---|
Adhesive | Removable |
Product Agency | Vector Media,OUTFRONT Media,Intersection |
Color Family | White |
Converting | Sheet Form,Roll to Sheet |
Double Face | 0 |
Film Family | Vinyl |
Master Web Width | 64.000 |
Other Available Widths | 54.00,62.00 |
Print Technology | Conventional Offset |
Quilon | 0 |
Remoist | 0 |
Surface Type | LSE Plastic,Metal,Paint,Paper/Fiber |
Surface Treatment | N/A |
Surface Texture | Smooth |
Surface Profile | Flat,Rigid |
Pricing Overview
MSI Pricing
Roll Pricing
SQF Pricing
Please log in to view sales figures.
All of the descriptive information, the typical performance data, and recommendations for the use of Flexcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by Flexcon. All purchasers of Flexcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of Flexcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.
Modified on: