FLX011974

Flexcon® PharmCal® Supreme 011974 (PharmCal® PP 230 H White TC-332™ V-344 TracRite™ 150)

2.3 Mil White Polypropylene, Permanent Adhesive, Poly Liner

Home Technical Data and Details Availability

Benefits

  • Biocompatible adhesive mitigates risk of migration through packaging
  • 21 CFR 175.105; ISO 10993-5, -10 Compliant*

Click to view PDF

Contact: +1 508 885 8200

Features

  • 2.3 mil hard white polypropylene offers excellent resistance to shrinkage, high temperatures, moisture, humidity and product contents
  • Topcoat optimizes printability via narrow-format UV inkjet, flexographic, UV screen, UV letterpress, UV offset, thermal transfer, and hot stamping
  • Permanent aggressive adhesive provides a high ultimate bond, and excellent tack, clarity, and wet out characteristics
  • High-adhesive performance bonds to tight-radius glass or plastic containers
  • Flexcon® TracRite™ 150 polyester release liner for excellent on-press performance for tight registration graphics
  • Release liner is ideal for roll-form applications that require high-speed dispensing

Additional Details

*FDA CFR 175.105: Adhesives may be safely used as components of articles intended for use in packaging, transporting, or holding food in accordance with the following prescribed conditions. ISO 10993 Biological evaluation of medical devices: Part 5:Tests for in vitro cytotoxicity; Part 10:Tests for irritation and skin sensitization.

"Fit-for-use” testing is recommended under actual application conditions.

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.3 +/- 10%58
Adhesive 0.7-0.8 +/- 0.118-20 +/- 3
Liner1.4 +/- 5 %36

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD No shrinkage observed
TD

Test Method: On Al panel at 160°F (71°C) for 24 hr.

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Glass59649
Polypropylene18198

Test Method: ASTM D 903 (Modified for 72 hr. dwell time)

Additional PropertiesValueTest Method
Expected Shear30ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load)
Tack1090ASTM D 2979
Expected Exterior LifeIndoor use only
Additional Information
Service Temperature -40°F to 212°F (-40°C to 100°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyN/A
Color FamilyWhite
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyHot Stamping, Inkjet - UV Narrow Format, Letterpress - UV, Offset - UV, Screen - UV, Flexographic - UV, Flexographic - Water, Flexographic - Solvent
Surface TypeHSE Plastic, LSE Plastic, Glass
Surface TreatmentN/A
Surface TextureSmooth
Surface ProfileRigid, Convex

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.