|
|
FEATURES & BENEFITS
|
|
- 1.0 mil white double-faced polyester provides white opaque base for printed graphic
- Underlaminate's permanent adhesive (against the clear film liner) bonds well to the reverse printed, high-gloss vinyl
- FLEXmark® floor art™ 6605/6600 or FLEXmark® floor art™ 6280DG/6600 laminated graphic must be allowed to set up for 72 hours before being applied to the application surface
- The removable adhesive (against the paper liner) of the underlaminate is adhered to the floor and allows graphics to be removed at the end of the promotion
- The removable pressure-sensitive acrylic adhesive bonds well to waxed and non-waxed commercial PVC tile, certain ceramic tile, sealed concrete and linoleum
- Film meets industry standards for non-slip performance (ASTM D 2047) when used as the underlaminate on FLEXmark® floor art™ 6605 base film or FLEXmark® floor art™ 6280DG base film
This product is part of FLEXcon's Indoor Floor Advertising Systems: Indoor Floor Advertising System (FLEXmark® floor art™ 6605/FLEXmark® floor art™ 6600)
Indoor Floor Advertising System (FLEXmark® floor art™ 6280DG/FLEXmark® floor art™ 6600)
| Adhesive:
| 1 Side Permanent/1 Side Removable
| | Agency/Specifications:
| N/A
| | Color Family:
| White
| | Converting:
| Roll Form,Roll to Sheet
| | Double Face:
| Y
| | Film Family:
| Polyester
| | Master Web Width:
| 54.00000
| | Other Available Widths:
|
N/A
| | Print Technology:
| N/A
| | Quilon:
| 0
| | Remoist:
| 0
| | Surface Type:
| Linoleum,Ceramic,Lumber/Wood,Sealed Concrete
ccc | | Surface Treatment:
| Floor Sealer,Wax,Polish
| | Surface Texture:
| Smooth
|
|
Surface Profile:
|
Flat
|
TECHNICAL DATA
| PRODUCT DATA | VALUE | DATA | | Physical Properties | | | | Thickness (Mils[microns]) | | ASTM D 3652 (Modified for use with non-tape products) | | | | | | Permanent Adhesive | 0.8-0.9 (20-23) +/- 0.1 (3) |
| | | | | | | Adhesive | 1.0 - 1.1 (25-28) +/- 0.1 (3) |
| | | | | | Dimensional Stability (%) | | Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C) | | | No Shrinkage Observed | None Observed |
| | | Adhesion Properties | | | | Ultimate Peel from | | ASTM D 903 (Modified for 72 hour dwell time) | | Average | | | | | | Ceramic Tile | | | | Non-waxed PVC Tile | | | | Sealed Concrete | | | | Sealed Linoleum | | | | Waxed PVC Tile | | | | Expected Shear | | ASTM D 3654 Method A
a. 1 hr. dwell
b. 1 sq. in. surface
c. 4 lb. load | | Room Temp (hours) | 50 | | | Tack (gm/sq cm) | 280 | ASTM D 2979 | | Expected Exterior Life | Indoor use only | | | Service Temperature Range | -40°F to 176°F (-40°C to 80°C) | | | Minimum Application Temperature | 50°F (10°C) | | | Storage Stability | Two years when stored at 70°F (21°C) and 50% relative humidity | |
PRODUCT PRICING
In order to view product pricing, please Log In or Register.
|